CR 35-X D
IGITIZER
4
Insert the cassette containing the emergency image plate into the cassette slot
as shown below.
Make sure to insert the cassette with the hinge [1] at the top and the locking
mechanism [2] at the bottom.
When the CR 35-X has treated the emergency image plate, it displays the operator
main screen. The image processing station will give the emergency image priority
over the other images in the image processing queue.
5
Remove the cassette from the cassette slot.
Reading emergency image plates without ID data
To read an emergency image plate without ID data:
1
Check that the CR 35-X is ready for operation:
•
The CR 35-X must display the operator main screen with 'Ready' status, e.g.:
50
Reading an emergency image plate
1
2
Note: If you do not enter a cassette within 1 minute after pressing the
Emergency key or if you enter a cassette without ID data, the CR 35-X will
quit the emergency function and return to the operator main screen.
Status field
READY
4454C EN 2013-05-14