AGFA CR 35-X User Manual page 67

Status field:
MESSAGE 1
PARTLY SCANNED IP
DETECTED
Status field:
MESSAGE 1
IP NOT SUFFICIENTLY
ERASED
EMPTY CASSETTE
CASSETTE WRITE ERROR
WRONG CASSETTE
CASSETTE
IDENTIFICATION ERROR
CASSETTE READ/WRITE
ERROR
CASSETTE NOT
IDENTIFIED
4454C EN 2013-05-14
WARNING
Message 2
Possible loss of image,
press
LOCKED
Message 2
Press and erase again
Press to get cassette
Press to get cassette
Press and remove
cassette.
Press , remove and
identify
Press , remove and try
again
Press , remove and
identify
Action
• Press Confirm key.
• Check image at destination.
Action
• Press Confirm key.
• Refer to 'Re-erasing an image plate'
on page 56.
• Press Confirm key.
• Remove cassette.
• Insert cassette containing image
plate.
• Press Confirm key.
• Remove cassette.
• Use another cassette.
• If problem persists with other
cassettes, contact your local service
organization.
• Press Confirm key.
• Remove cassette.
• Insert correct cassette in the right
way.
• Press Confirm key.
• Remove cassette.
• Re-identify cassette.
• Re-insert cassette.
• Press Confirm key.
• Remove cassette.
• Re-insert cassette.
• If problem persists, initialize and
identify cassette via ID Station.
• If problem persists with other
cassettes, contact your local service
organization.
• Press Confirm key.
• Remove cassette.
• Identify cassette.
• Re-insert cassette.
Troubleshooting checklist
CR 35-X D
IGITIZER
67