AGFA CR 35-X User Manual page 92

CR 35-X D
IGITIZER
This device is intended for operation in the electromagnetic
environment given below. The user of the device should ensure
that it is used in such an environment.
Tests of Resistance to
Disruption
Conducted high
frequency disturbance
variables in accordance
with IEC 61000-4-6
Radiated high
frequency disturbance
variables in accordance
with IEC 61000-4-3
• REMARK 1: The higher value will apply at 80 MHz and 800 MHz.
• REMARK 2: These Guidelines may not apply to all situations. The dispersion of
92
Remarks for HF-emission and immunity
IEC 60601
Test Level
3 V
eff
150 kHz
to 80 MHz
3 V/m
80 MHz
to 2.5 GHz
electromagnetic waves is influenced by absorption and reflections from buildings,
objects and people.
Level of
Electromagnetic Environment
Agreement
Use portable and mobile radio sets
at a safe distance from the device
(including the leads) not closer
than the recommended protective
distance, which is calculated
according to the equation suitable
for the transmission frequency.
Recommended protective distance:
d = 1.2
3 V
eff
3 V/m
d = 1.2
d = 2.3
With
transmitter in watts (W) in
accordance with the manufacturer
information on the transmitter and
d as the recommended protective
distance in metres (m).
The field strength of stationary
radio transmitters is lower than the
level of the agreement
frequencies in accordance with an
on-site investigation
Disruptions are possible near
devices that carry the following
symbol:
P
P
80 MHz to 800 MHz
P
800 MHz to 2.5 GHz
P
as the rated power of the
a
at all
b
.
4454C EN 2013-05-14