AGFA CR 35-X User Manual page 35

Constant/
Color
Flashing
Constant
Flashing
Red
Flashing
Emergency buttons
Two emergency buttons are located at the front of the CR 35-X. The
emergency buttons determine the speed class, i.e. the sensitivity, which will
be used to digitize the image plate. The sensitivity associated with the
emergency buttons has been set during the configuration of your system. For
more information, contact your local service organization.
The emergency buttons have the following labels:
For digitizing images of the trunk.
For digitizing images of the limbs.
In the interchangeable configuration, the emergency buttons allow you to

digitize emergency image plates without ID data.
In the dedicated configuration, the emergency buttons allow you to digitize

an image plate while you are entering the identification data via the ID Station.
4454C EN 2013-05-14
Status
Error.
Initializing a cassette.
• Locked or warning.
• Power on/self-test in
progress.
• Key-operator mode.
• Service mode.
• CR 35-X not
connected to image
processing station.
CR 35-X D
Action
• Check display for messages.
• Refer to 'Troubleshooting check-
list' on page 65.
Wait.
• Check display for messages.
• Refer to 'Troubleshooting check-
list' on page 65.
The user interface
IGITIZER
35