Configurations - AGFA CR 35-X User Manual

Configurations

The CR 35-X can be used in two configurations: either one or more ID Stations
serve a range of Digitizers, or one ID Station is dedicated to one Digitizer. For
the ID Station a CR User Station with included ID Tablet can be used as well as
a stand-alone ID Tablet. The ID Software installed on the PC is slightly
different depending on the configuration. For more information, contact your
local service organization.
Interchangeable configuration
One or more ID Stations can serve a range of Digitizers, provided that each ID
Station has an ID Tablet. There is no physical link required between the ID
Station and the Digitizer.
In this configuration, a cassette can be identified via any of the ID Stations
and subsequently be scanned using any of the Digitizers. The patient
demographic data and examination data are entered via the ID Viewer
Software and stored in the memory chip of the ADC cassette via the ID Tablet.
As a result the identification data are linked to the cassette and any Digitizer
can be used to scan the cassette.
The interchangeable configuration allows the flexible use of several Digitizers
and ID Stations depending on the workload.
4454C EN 2013-05-14
CR 35-X D
IGITIZER
21
Configurations