Smtp Tab - Ricoh P C311W User Manual

Item
SNMPv3 Account 2
SNMPv3 Management
Host 2

SMTP Tab

SMTP
Item
Primary SMTP Server
SSL/TLS
Port No.
Authentication Method
User Name
Password
Device E-mail Address
Server Timeout
(seconds)
Select either [User Account] or [Admin Account].
Enter the IP address or host name of a management host. Can contain up to
64 characters.
Enter the IP address or host name of the SMTP/POP3 server. Can contain
up to 64 characters.
Select whether or not to apply SSL/TLS encryption when sending emails to
the SMTP server. Check the box to enable SSL/TLS.
Enter the port number for SMTP (1 to 65535).
If [SSL/TLS] is checked, Port 465 is automatically selected. (Otherwise, Port
25 is selected by default.)
Select an authentication method from the following:
[Anonymous]: The user name and password are not necessary.
[SMTP]: The machine supports NTLM and LOGIN authentication.
[POP before SMTP]: The POP3 server is used for authentication. When
sending e-mails to an SMTP server, you can enhance the SMTP server
security level by connecting to the POP server for authentication.
Enter the user name for logging in to the SMTP server. Can contain up to 32
characters.
Enter the password for logging in to the SMTP server. Can contain up to 32
characters.
Enter the machine's e-mail address.
This address is used as the sender's address of e-mail messages sent from
this machine, such as notification e-mails. Can contain up to 64 characters.
Enter the number of seconds the machine waits before considering an
SMTP operation to have timed out (1 to 999).
Configuring the Network Settings
Description
Description
117