Ricoh P C311W User Manual page 185

Problem
Black gradation is not natural.
Solid lines are printed as broken
lines.
Fine dot patterns do not print.
Solid areas, lines or text are shiny or
glossy when created as a mixture of
cyan, magenta, yellow.
Speckling occurs in areas of solid
black print.
If rubbed with your finger, the print
smears.
Only when using PostScript 3
Select [CMY + K] for [Gray Reproduction] in the printer
driver's dialog box.
See the printer driver Help.
Only when using PostScript 3
Change the [Dithering] setting in the printer driver's
dialog box.
See the printer driver Help.
Only when using PostScript 3
Change the [Dithering] setting in the printer driver's
dialog box.
See the printer driver Help.
Only when using PostScript 3
Select [Black by K] for [Gray Reproduction] in the printer
driver's dialog box.
See the printer driver Help.
Only when using PostScript 3
Select [CMY + K] for [Gray Reproduction] in the printer
driver's dialog box.
See the printer driver Help.
The setting of the paper may not be correct. For example,
although thick paper is used, the setting for thick paper may
not be specified.
• Check the paper settings of this printer.
See page 26 "Loading Paper".
• Check the paper settings of the printer driver.
See the printer driver Help.
Printer Problems
Solution
183