Ricoh P C311W User Manual page 118

5. Configuring the Machine Using Utilities
Item
Security Settings
Authentication
Algorithm
Authentication
Password
(Required)
Encryption Algorithm
Encryption Password
(Required)
MIB Access Type
SNMPv3 Trap
Item
SNMPv3 Trap
SNMPv3 Account 1
SNMPv3 Management
Host 1
116
Specify the user account security setting by selecting one of the following:
[Authentication Encryption]: It is necessary to specify [Authentication
Algorithm], [Authentication Password], [Encryption Algorithm], and
[Encryption Password].
[Authentication Non-Encryption]: It is necessary to specify [Authentication
Algorithm] and [Authentication Password]. [Encryption Algorithm] and
[Encryption Password] cannot be specified.
[Non-Authentication Non-Encryption]: [Authentication Algorithm],
[Authentication Password], [Encryption Algorithm] and [Encryption
Password] cannot be specified.
Specify the authentication algorithm from the following:
[MD5], [SHA1], [SHA224], [SHA256], [SHA384], [SHA512]
Enter a password for the Admin account. Can contain up to 32 characters.
Specify the encryption algorithm from the following:
[AES128], [DES]
Enter a password for encrypting the Admin account password.
Can contain up to 32 characters.
Select an access type for the administrator account to access MIB from the
following:
[read-only], [write-only], [read-write], [Not-Accessible]
Select whether to enable the machine to send SNMPv3 traps to the
management host (NMS).
When disabled, [SNMPv3 Management Host 1] and [SNMPv3
Management Host 2] below become unavailable.
Select either [User Account] or [Admin Account].
Enter the IP address or host name of a management host. Can contain up to
64 characters.
Description
Description