When Paper Is Not Fed Properly - Ricoh SP C250DN Operating Instructions Manual

7. Troubleshooting
Problem
Solid lines are printed as broken
lines.
Fine dot patterns do not print.
Solid areas, lines or text are shiny or
glossy when created as a mixture of
cyan, magenta, yellow.
Speckling occurs in areas of solid
black print.
If rubbed with your finger, the print
smears.

When Paper Is Not Fed Properly

Problem
Prints fall behind the machine when
they are delivered.
170
Only when using PostScript 3
Change the [Dithering] setting in the printer driver's
dialog box.
See the printer driver Help.
Only when using PostScript 3
Change the [Dithering] setting in the printer driver's
dialog box.
See the printer driver Help.
Only when using PostScript 3
Select [Black by K] for [Gray Reproduction] in the printer
driver's dialog box.
See the printer driver Help.
Only when using PostScript 3
Select [CMY + K] for [Gray Reproduction] in the printer
driver's dialog box.
See the printer driver Help.
The setting of the paper may not be correct. For example,
although thick paper is used, the setting for thick paper may
not be specified.
• Check the paper settings of this printer.
See page 54 "Loading Paper".
• Check the paper settings of the printer driver.
See the printer driver Help.
Pull up the appropriate stop fence (forward fence for A4/
Letter, rear fence for Legal size prints). See page 17 "Guide to
Components".
Solution
Solution