Replacing The Memory Expansion Slot Cover - Compaq Armada 7700 Reference Manual

Replacing the Memory Expansion Slot Cover

To replace the memory expansion slot cover:
1. Lay the memory insulator
expansion board (s), ensuring that all edges of the
memory insulator are tucked inside the memory
expansion compartment.
2. Replace the memory expansion slot cover
flush right over the memory expansion compartment, then
sliding it left until it is seated.
3. Attach the memory expansion slot cover to the computer with
a memory expansion slot cover security screw
Torx T-8 screw.
Replacing a Memory Expansion Slot Cover
11-6 Increasing RAM
over the installed memory
by placing it
or a standard