Removing a Memory Expansion Board
This section tells how to remove a memory expansion board from
a memory expansion slot.
If you are not replacing an installed memory expansion
board, refer to the following section, "Inserting a Memory
Expansion Board."
To remove an installed memory expansion board:
1. Lift and hold back the memory insulator
2. Pull away the plastic retention clips on each side of the
memory expansion board to release it
expansion board tilts toward you.
3. Lift the edge of the memory expansion board and slide
it gently out of the memory expansion slot at a
45-degree angle
4. Place the removed memory expansion board in an
electrostatic-safe container.
Releasing and Removing an Installed Memory Expansion Board
11-4 Increasing RAM
.
.
. The memory