Connecting The Power Cord - Compaq Armada 7700 Reference Manual

Connecting the Power Cord

To connect the computer to electrical power:
1. Place the computer on a flat surface near an electrical outlet.
2. Plug the power cord into the power connector on the rear
panel of the computer
If you are plugging in the computer in Japan, you must first
NOTE:
plug the power cord into the 3-to-2-prong plug adapter included
with the computer. Ensure that the ground wire is connected to a
safe earth ground, then plug the 3-to-2-prong plug adapter into the
electrical outlet.
Plugging In the Computer
WARNING:
!
fire, or damage to the equipment:
Do not disable the power cord grounding plug. The grounding
plug is an important safety feature.
Plug the equipment into a grounded (earthed) electrical outlet
that is easily accessible at all times.
Disconnect power from the equipment by unplugging the power
cord from the electrical outlet.
Do not place anything on power cords or cables. Arrange them so
that no one may accidentally step on or trip over them. Do not
pull on a cord or cable. When unplugging from the electrical
outlet, grasp the cord by the plug.
1-6 Getting Started
, then into the electrical outlet
To reduce the risk of personal injury, electric shock,
.