chapter
C
OMPUTER
D
IAGNOSTICS
Compaq Utilities comprises Computer Setup, Computer Checkup
(TEST), View System Information (INSPECT), and other
configuration and diagnostic utilities that you can use to
Configure the computer system
Test for proper functioning of system components
Display information about system configuration
To prevent unauthorized access to Compaq Utilities,
NOTE:
establish a set-up password. For instructions, refer to "Using a
Setup Password" in Chapter 13.
To select a utility from the Compaq Utilities menu:
1. Turn on or restart the computer.
To restart a computer running Windows 95 or Windows NT,
click the Start buttonÆShut DownÆRestart the
ComputerÆYes.
2. Press
F10
corner of the screen.
The cursor remains upper right on the screen for only about
2 seconds. If you do not press
restart the computer and try again.
3. If prompted, select a language.
4. Use the up and down cursor keys to select a utility, then
press
Enter
14
S
ETUP AND
as soon as the cursor appears near the upper-right
.
F10
within this time, you must
Computer Setup and Diagnostics 14-1