Removing A Battery Pack From The Multibay - Compaq Armada 7700 Reference Manual

Removing a Battery Pack from the MultiBay

To remove a battery pack from the computer MultiBay:
1. If the computer is on and you want to return your work to the
screen after replacing the battery pack that is running the
computer, press the suspend button.
2. Tilt the computer
3. If the battery pack has been secured in the MultiBay with a
single-bay security screw
remove the screw with the Torx T-10 screwdriver included
with the computer. For more information about these security
features, refer to "Securing Devices in the Hard Drive Bay and
MultiBay" in Chapter 13.
4. Slide the MultiBay release latch
battery from the recess
Releasing a Battery Pack from the MultiBay
5-14 Using Battery Packs
to access the MultiBay release features.
or a dual-bay security screw,
back while pulling on the
beneath the MultiBay.