Expansion Memory Module Slot - Compaq nw9440 - Mobile Workstation Manual

Adding or replacing memory modules
Adding a memory module to the

expansion memory module slot

To add or replace a memory module in the expansion memory
module slot:
1. Save your work and close all open programs.
✎
2. Click Start, click the arrow next to the Lock button, and then
click Shut Down.
3. Close the display.
4. Disconnect all external devices connected to the computer.
5. Unplug the power cord.
6. Turn the computer upside down on a flat surface.
7. Remove the battery from the computer.
2
Be sure that the computer is not in Hibernation. If you are
not sure whether the computer is off or in Hibernation, turn
the computer on by pressing the power button. Then shut
down the computer through the operating system.
Memory Modules