Removing A Memory Expansion Board - Compaq Armada E700 Series Maintenance And Service Manual

Removing a Memory Expansion Board

1. Lift and hold back the memory insulator
(Figure 5-25).
2. Spread the retaining tabs apart
3. Lift the edge of the memory expansion board and slide it gently out of the memory
expansion slot at a 45-degree angle
Figure 5-25. Removing a Memory Expansion Board
4. Place the memory expansion board in an electrostatic-safe container.
5. If no memory expansion board is to be installed, reset the memory insulator.
6. Replace the memory expansion compartment cover and install the screw.
. The insulator is not removable
1
. The memory expansion board tilts upward.
2
.
3
Removal and Replacement Procedures 5-29