Macro Operations (Numeric Keypad Control Block And Utility/Shotbox Control Block) - Sony XKS-C9111 User Manual

• User preference buttons in the menu panel assigned with
macro register recall function
Multi mode is set in the Engineering Setup >Panel
>Operation >Macro menu (7326.6).
For details, see "Setting the Macro Operation Mode"
(page 433).
Notes
• In multi mode, macros are executed in normal execution
mode, regardless of the execution mode setting.
• Up to 16 macros can be executed simultaneously.
• The editing operations cannot be used for macros that are
being executed simultaneously.
• If operations due to events executing simultaneously
conflict with each other, the events may not be
reproduced with the registered settings or sequence.
• To resume all paused macros within the macros executed
simultaneously, press the button assigned with the
"Macro All Take" utility command.
• To stop all macros executed simultaneously, press the
button assigned with the "Macro All Cancel" utility
command.
Macro operation triggered by GPI input
You can execute a macro take operation using a GPI input
on the SIU (DCU function).
For details about GPI inputs, see "Configuring GPI
Inputs" (page 476).
Macro Operations
(Numeric Keypad Control
Block and Utility/Shotbox
Control Block)
MCRO button
UNDO button
STORE STATS button
Numeric keypad control block
EDIT ENBL button
Editing buttons
Utility/shotbox control block
349
Display
RCALL button
STORE button
Numeric keypad buttons
KF MCRO EDIT button
PAUSE button
Edit point
specification buttons
AUTO INS button