Macro Attachments - Sony XKS-C9111 User Manual

To delete an event
1
In the macro creation list, select the event you want to
delete.
2
Press [Delete].
The selected event is deleted.
If a deleted Event statement is followed by a Continue
statement, the Continue statement is converted to an
Event statement.
3
Press [Store].
To create a new macro
1
From the list in any of the following menus, select an
empty register or file, and press [Off Line Edit].
• Macro >Register >Attach menu (5411)
• Macro >Register >Lock menu (5412)
• Macro >Register >Delete menu (5416)
• Macro >Register >Rename menu (5417)
• File >Shotbox, Macro >Macro >File Edit menu
(7142.1)
The Off Line Edit menu (7142.3) appears.
2
Carry out steps 2 to 7 in "To insert an event"
(page 362) to create an the event.
To close the Off Line Edit menu without saving
the editing results
Press [Exit].

Macro Attachments

A macro attachment is a function whereby a macro register
is assigned to a control panel button or a particular position
of a fader lever, linking the execution of the button
function or a fader lever operation with a macro execution.
Setting a macro attachment
Select one of the following three linking modes to make
the macro attachment.
Pre-macro: Mode in which the button function is
executed after macro execution has completed.
Post-macro: Mode in which the macro is executed after
carrying out the button function.
Macro only: Mode in which the button function is not
executed, and the macro only is executed.
Select each mode using the following buttons.
Mode Button
Pre-macro Press [PRE MACRO] on the cross-point
pad of the cross-point control block.
Post-macro Press [POST MACRO] on the cross-point
pad of the cross-point control block.
Macro only Press the [PRE MACRO] button and
[POST MACRO] button simultaneously.
You can assign any one of the 250 macro registers to a
button.
For a button whose function is switched by delegation, you
can make a separate macro attachment for each function.
Macro attachments can be set for the following buttons.
Control block Button
Cross-point • Cross-point buttons of the bus assigned
control block
to the 1st row to 4th row
• Disabled buttons (set to "Inhibit")
AUX bus Cross-point buttons of the bus assigned to
control block the 3rd row/4th row
(AUX bus
operation
mode)
Transition Fader lever and buttons assigned with the
control block following functions.
• Next transition selection
• Transition type selection
• Auto transition, cut
• Device operation (CUE, PLAY, STOP)
• Pattern limit enable/disable
• Independent key transition auto-
transition and key on/off
Transition Fader lever and buttons assigned with the
control block following functions.
(simple type) • Auto transition, cut
• Transition type selection
• Pattern limit enable/disable
• Device operation (CUE, PLAY, STOP)
363
a)