Chapter 6 Dme Wipes; Overview; Types Of Dme Wipe Patterns - Sony XKS-C9111 User Manual

Multi format switcher system with integrated control panel
Hide thumbs Also See for XKS-C9111:
Table of Contents

Advertisement

DME Wipes

Overview

A DME wipe is an effect that uses a DME effect to switch
from the current output image to a new image.
There are two types of DME wipes: those that can be
selected in a common transition, and those that can be
selected in an independent key transition.
You can also execute a DME wipe using a resizer (resizer
DME wipe) in transitions and independent key transitions
where a key is selected (inserted/removed) as the result of
the transition (next transition event).
Notes
• When the switcher signal format is 3840×2160PsF SQD,
DME wipes cannot be used.
• When the switcher signal format is 3840×2160P SQD,
only resizer DME wipes can be used.
• When the switcher signal format is 3840×2160P 2SI,
DME wipes are supported using an XKS-8475 DME
Board. When not using an XKS-8475, only resizer DME
wipes are supported.
• There are restrictions on the number of DME channels
that can be used and on the functions, depending on the
switcher and signal format.
For differences in functions by switcher, see "XVS-9000/
8000/7000/6000 System Configuration Comparison"
(page 525).
For details about restrictions for 4K format, see "4K
Format Restrictions" (page 527).

Types of DME Wipe Patterns

The patterns used for a DME wipe fall into two broad
classes.
Preset patterns: Patterns with predetermined effects
User programmable DME patterns: Patterns that you
create using keyframe effects (see page 167)
Chapter
DME wipe pattern groups
DME wipe patterns are classified into the following
groups.
Notes
• On the XVS-6000, DME wipe patterns in 3-channel
mode are not available when using an XKS-8470 HD
DME Board.
• When using an XKS-8475 DME Board, the following
restrictions apply in 4K format (3840×2160P 2SI).
- On the XVS-8000/7000, DME wipe patterns in
3-channel mode are not supported.
- On the XVS-6000, DME wipe patterns in 2-channel
mode and 3-channel mode are not supported.
• The following DME wipe patterns for effects vary
depending on the board used (XKS-8470 HD DME
Board or XKS-8475 DME Board).
Mosaic
155
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents