Signal Selection - Sony XKS-C9111 User Manual

Signal Selection

You carry out signal selection with the cross-point buttons
in the cross-point control block of the M/E bank or PGM/
PST bank, and the buttons in the AUX bus control block
(AUX bus operation mode).
1st row
2nd row
Display
Cross-point indicators
3rd row
4th row
1st row
2nd row
Display
Cross-point indicators
3rd row
4th row
Depending on the module used, each row has 36 buttons,
28 buttons, or 20 buttons. This section describes modules
with 36-button rows.
Cross-point button rows
Cross-point control block
Delegation button rows
Cross-point button rows
AUX bus control block (AUX bus operation mode)
75
Cross-point pad
Cross-point pad