Split Settings; Split Slide Settings; Mirror Settings - Sony XKS-C9111 User Manual

Split Settings

You can set the degree to which the image is split, the split
positions, and other parameters.
Applying the Split effect
1
In the <Mode> group of the Non Linear >Split menu
(4141.11), select the separation method.
Single: Leave gaps between splits as-is.
Double: Fill gaps between splits with the same image.
2
Set the following parameters.
Parameter group [1/2]
No. Parameter Adjustment
1 Transition Degree of left and right separation
H
2 Transition Degree of top and bottom
V separation
Parameter group [2/2]
No. Parameter Adjustment
1 Top Offset of top edge
2 Left Offset of left edge
3 Right Offset of right edge
4 Bottom Offset of bottom edge
To set the split position
1
Press [Position].
2
Set the following parameters.
No. Parameter Adjustment
1 H Degree of left and right separation
2 V Degree of top and bottom
separation

Split Slide Settings

You can set the degree of transition, the degree of
randomness in the distance moved by each block, the
degree of sliding, block width, block angle, and other
parameters.
Applying the Split Slide effect
In the Non Linear >Split Slide menu (4141.12), set the
following parameters.
Parameter group [1/2]
No. Parameter Adjustment
1 Transition
H
2 Random H
3 Skew H
4 Width H
5 Angle
Parameter group [2/2]
No. Parameter Adjustment
1 Transition
V
2 Random V
3 Skew V
4 Width V
5 Angle
To set the partition position
1
Press [Position].
2
Set the following parameters.
No. Parameter Adjustment
1 H
2 V

Mirror Settings

You can create an image reflected in the directions left to
right, right to left, bottom to top, top to bottom, or any
combination of directions. You can also set the position of
the border between the original and reflections.
Applying the Mirror effect
In the Non Linear >Mirror menu (4141.13), set the
reflection method (multiple selection supported).
Left to Right: Reflect left side on right.
Right to Left: Reflect right side on left.
Top to Bottom: Reflect top side on bottom.
Bottom to Top: Reflect bottom side on top.
Left to Right
255
Degree of transition in horizontal
direction
Degree of randomness in distance
moved by blocks in horizontal direction
Degree of skew in horizontal direction
Horizontal width of partition
Angle of partition line
Degree of transition in vertical direction
Degree of randomness in distance
moved by blocks in vertical direction
Degree of skew in vertical direction
Vertical width of partition
Angle of partition line
Horizontal partition position
Vertical partition position
Top to Bottom