• Deleting files
• Offline editing of macro files
• Deleting directories
1
Open the File >Configure >Directory menu (7171).
2
In the device selection area, select the target device for
operation (see page 377).
3
Select a directory.
4
Press [Protect].
Write inhibit is set for the selected directory, and "
is displayed in the "Protect" field in the status area.
Deleting a Directory
1
Open the File >Configure >Directory menu (7171).
2
In the device selection area, select the target device for
operation (see page 377).
3
Select a directory.
4
Press [Delete].
5
Check the message, then press [Yes].
Copying Files Between
Unit IDs
Switcher and DME files on the local drive or removable
drive are managed by unit ID (see page 388).
Files with a different unit ID cannot be copied using
ordinary file operations. To copy files, use the menu for
copying files between different unit IDs.
Note
"
If there is already data present in the copy destination, note
that all data will be overwritten.
Copying Files Between Different Unit
IDs
1
Open the File >Configure >Unit ID Copy menu
(7172).
2
Press the region selection area at the top right of the
screen and select a category.
For categories you do not want to copy, press the
corresponding button, turning it off.
You can also select all categories using [ALL],
switcher-related categories using [SWR ALL], or
DME-related categories using [DME ALL].
3
Press [OK].
4
Select the target device for operation (see page 377).
In the device selection area on the left, select the copy
source device, then specify a directory.
In the device selection area on the right, select the copy
destination device, then specify a directory.
5
Select the copy source and copy destination unit IDs.
6
Press [t Copy].
7
Check the message, then press [Yes].
387