Sony XKS-C9111 User Manual page 272

To rotate the ring
1
In the Light 1 menu (4156.3), press [Ring Speed],
turning it on.
When [Ring] is selected, the display of the 3rd
parameter changes.
2
Set the following parameter.
No. Parameter Adjustment
3 Speed Rotation speed and direction
a) –100.00 is four rotations per second in the counterclockwise
direction, and +100.00 is four rotations per second in the clockwise
direction. 0.00 stops the rotation.
To invert the illuminated area
In the Light 1 menu (4156.3), press [Light Invert], turning
it on.
To add color to the light source
1
In the Light 1 menu (4156.3), press [Light Color
Adjust].
The Light Color Adjust menu (4156.4) appears.
2
In the <Fill Blending Mode> group, select how the
light and image should be blended.
Mix: Lighting as if reflected from a mirror.
Multiply: Light as if reflected from a dull surface
(diffuse reflection).
3
When [Mix] is selected, select the fill color in the <Fill
Source> group.
Flat Color: A single color matte
Hue Rotation: Color matte with a color that gradually
varies
4
Set the following parameters, according to the fill
color selection.
When [Flat Color] is selected
No. Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Hue Hue
4 Brilliancy Brilliance of surface struck by light
a)
When [Hue Rotation] is selected
No. Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
No. Parameter Adjustment
3 Speed
4 Brilliancy
a) At 100.00, the image beneath the light shines through.
b) –12.00 is a 360° rotation every second in the counterclockwise
direction. +12.00 is a 360° rotation every second in the clockwise
direction.
Copying or swapping light source settings
a)
You can copy or swap the setting from one light source
(Light 1 to Light 3) to another light source.
1
In the Spot Lighting menu (4156), press [Copy/Swap].
The Copy/Swap menu (4156.2) appears.
In the status area, two lists appear. The copy or swap
sources are displayed on the left, and the copy or swap
destinations are displayed on the right.
2
Select the target data.
3
Press [Copy] to copy, or [Swap] to swap.
To undo a copy or swap
Press [Undo] to return settings to their values before the
copy or swap.
272
Speed at which the hue changes
Brilliance of surface struck by light
a)
b)