Sony XKS-C9111 User Manual page 556

Icon Message
Change Password
Failed.
The password was not changed.
Couple
Cannot couple while playing back or
locking is in progress.
Coupling has been canceled.
Duration of two files are different.
Error
This operation is canceled, because
the register is locked.
Please change the register status to
be unlocked first.
The file was not able to be read.
It was not possible to make a file.
"Source" and "Target" are the same
directory.
Please change the "Source" or the
"Target" directory.
The Source and the target are the
same directory.
Please change the source or the
target directory.
It failed.
Please confirm the server address.
Invalid IP address.
File Frame Memory
Some requests are skipped.
Following operation is not permitted.
– Loading that will cause duplicate
register name.
File Open Status
ERROR (01)
ERROR (02)
ERROR (FF): No target device has
been assigned
Description
7317.1: Engineering Setup >System >Maintenance >Setup Operation Lock
7317.2: Engineering Setup >System >Maintenance >File Load Lock
The password could not be changed.
2124: Frame Memory >File >Pair Recombination
Pair file cannot be created because the target file is being played back or is
locked (see page 181).
2124: Frame Memory >File >Pair Recombination
Pair file cannot be created because the durations of the two target files are
different.
6211.1: Effect >Master Timeline >Store >Edit
6311.1: Snapshot >Master Snapshot >Store >Edit
6411.1: Shotbox >Register >Store/Recall >Edit
6411.2: Shotbox >Register >Store/Recall >Key Snapshot Edit
When [Store] was pressed, the target register was locked.
Unlock the register before executing [Store].
7142.1: File >Shotbox, Macro >Macro >File Edit
When [Off Line Edit] was pressed, the selected file could not be read.
Select the file again, and press [Off Line Edit] once more.
7142.3: File >Shotbox, Macro >Macro >File Edit >Off Line Edit
The file could not be written when saving.
Try to save once more.
7161: File >All, External File >All
The same directory was selected for source and target.
Select different directories.
7172: File >Configure >Unit ID Copy
The same directory and ID were selected for source and target.
Select different directories and IDs.
7311: Engineering Setup >System >Network Config
An incorrect server address was entered.
Enter the correct server address.
7311.2: Engineering Setup >System >Network Config >IP Address
7311.7: Engineering Setup >System >Network Config >NMOS
7355.1: Engineering Setup >DCU >Serial/Net Port Assign >P-Bus Setting
7355.8: Engineering Setup >DCU >Serial/Net Port Assign >AMP Setting
7355.9: Engineering Setup >DCU >Serial/Net Port Assign >General tcp/ip
Setting
An incorrect IP address was entered.
Enter the correct IP address.
7151: File >Frame Memory >Frame Memory
A file with the same name already exists in storage when loading a file.
533X: Device >DDR/VTR
An error was returned from the DDR/VTR, and one of the messages on the
left appears, depending on the error number.
Check the device settings in menu 7355 (Engineering Setup >DCU >Serial/
Net Port Assign) or menu 7325.4 (Engineering Setup >Panel >Device
Interface >Device Assign).
556