Keyframe Strobe Settings - Sony XKS-C9111 User Manual

Field: Freeze in field units.
Note
When the signal format is 3840×2160P 2SI, 1080P,
1080PsF, or 720P, the freeze timing cannot be specified.
To turn the afterimage portion into stardust
The afterimage portion becomes stardust, and gradually
disappears.
1
In the DME >Light/Trail >Motion Decay menu
(4153), press [Dust], turning it on.
2
Set the following parameters.
No. Parameter Adjustment
1 Decay Dust Amount of the afterimage
disappearing as stardust
2 Dust Soft Timing with which stardust
disappears
3 Dust Size Size of stardust
4 Dust Aspect Aspect ratio of stardust
a) The way in which the afterimage disappears is affected by both the
motion decay [Video Decay] and [Decay Dust] parameter
adjustments.

Keyframe Strobe Settings

Note
Enabling Keyframe Strobe automatically disables Trail,
Motion Decay, or Wind if it is set.
Applying the Keyframe Strobe effect
1
Open the DME >Light/Trail >KF Strobe menu (4154).
2
Press [KF Strobe], turning it on.
3
Set the following parameter.
No. Parameter Adjustment
1 Decay Degree of decay of the video signal
a)
a) 0.00 represents no afterimage. 100.00 represents no decay in the
afterimage.
Selecting the overlay priority for movie and
still images (video freeze image)
In the <Priority> group of the DME >Light/Trail >KF
Strobe menu (4154), select the way in which the images
are overlaid.
Over: The movie is on top, and the still image is
underneath.
Under: The movie is underneath, and the still image is on
top.
Mix: The movie and still images are mixed. You can set
the following parameter.
No. Parameter Adjustment
1 Mix
a) The 0.00 setting is the same as [Over]. 100.00 is the same as [Under].
Selecting the freeze timing
a)
In the <KF Freeze Timing> group of the DME >Light/
Trail >KF Strobe menu (4154), select the timing for
freezing a keyframe strobe.
Frame: Freeze in frame units.
Field: Freeze in field units.
Note
When the signal format is 3840×2160P 2SI, 1080P,
1080PsF, or 720P, the freeze timing cannot be specified.
Erasing the afterimages that remain in
memory whenever a keyframe is passed
In the DME >Light/Trail >KF Strobe menu (4154), press
[KF Strobe Eraser], turning it on.
When the effect passes a keyframe, the afterimage is
erased before writing a new afterimage.
To turn the afterimage portion into
stardust
The afterimage portion becomes stardust, and gradually
disappears.
1
In the DME >Light/Trail >KF Strobe menu (4154),
press [Dust], turning it on.
2
Set the following parameters.
No. Parameter Adjustment
1 KF Strobe
Dust
2 Dust Soft
3 Dust Size
265
Mix amount of the still image with
a)
respect to the movie
Amount of the afterimage
disappearing as stardust
Timing with which stardust
disappears
Size of stardust
a)