Sony XKS-C9111 User Manual page 41

Button name Description
M/E1 to M/E5, P/P • Switches to resizer operation
• You can select more than one
DME Switches to three-dimensional
transform operation mode.
MENU • Switches to menu parameter
• You can adjust parameters
• Press the [MENU] button twice,
RUN CTRL (run • Switches to keyframe operation
control)
• Enables operation on the timeline
DEV (device) Switches to VTR/disk recorder/
frame memory operation mode.
b Channel selection buttons
These select the target to control when in resizer operation
mode, three-dimensional transform operation mode, VTR/
disk recorder/frame memory operation mode, and so on.
You can select more than one channel. The first selected
button becomes the reference channel, and is lit green.
Subsequent selected buttons are lit amber.
For buttons that not set by default, assignment is required
in the Setup menu.
For details, see "Setting Device Control Block (Trackball)
Button Assignments" (page 412).
Button name Description
K1RSZ to K8RSZ Selects the target resizer in resizer
operation mode.
CH1 to CH4 • Selects the target DME channel
• Select the target DME channel
• Displays the state of the
CH1 to CH12 Selects the target device in VTR/
disk recorder/frame memory
operation mode.
mode.
button. The first selected button
becomes the reference, and is lit
green. Subsequent selected
buttons are lit amber.
operation mode.
(numbers 1 to 3) of the currently
displayed menu using the
trackball and Z-ring.
turning it on green, to fix the
target of the trackball and Z-ring
to the parameter currently being
adjusted.
mode.
of the currently recalled keyframe
effect using the Z-ring.
in three-dimensional transform
operation mode.
for operation in the DME menu.
reference channel in the DME
menu.
Button name
FM1 CLIP to FM20
CLIP
c Operation buttons
The function of the buttons vary depending on the
operation mode.
Resizer operation mode
This mode performs two-dimensional transform
operations on images using a resizer.
Button name
RSZR ON (resizer on)
ASP PERS (ASP:
aspect)
LOC SIZE (location
and size)
ROT (ROT PERS:
rotation and
perspective)
BDR/CROP (border/
crop)
SHIFT
CLR WORK BUFR
(clear work buffer)
FINE
41
Description
(Assignment in the Setup menu is
required.)
Selects the target frame memory
clip in VTR/disk recorder/frame
memory operation mode.
Description
Enables/disables the selected
resizer.
Adjusts the aspect ratio of a key to
which the resizer is applied using
the trackball or Z-ring.
Moves/zooms a key to which the
resizer is applied using the trackball
or Z-ring.
Adjusts the rotation and
perspective of a key to which the
resizer is applied using the trackball
or Z-ring.
(Assignment in the Setup menu is
required.)
• When the [BDR/CROP] button is
pressed (lit amber):
Adjusts the border width of a key
to which the resizer is applied
using the trackball or Z-ring.
• When the [BDR/CROP] button is
pressed while pressing the
[SHIFT] button (lit green):
Adjusts the crop width of a key to
which the resizer is applied using
the Z-ring.
Used in combination with the
[CTR], [CTR WORK BUFR], and
[BDR/CROP] buttons.
• When the [CLR WORK BUFR]
button is pressed once:
Returns the resizer two-
dimensional transform and
rotation parameters to the
defaults.
• When the [CLR WORK BUFR]
button is pressed twice, or is
pressed once while pressing the
[SHIFT] button:
Returns all resizer parameters to
the initial state.
Switches to fine mode, enabling
fine adjustment control of setting
values using the trackball and Z-
ring.