Poe Time Range Setup - ZyXEL Communications XS1930-12HP User Manual

Table 31 Basic Setting > PoE Setup (continued)
LABEL
Max Power (W)
Time Range
State

8.8.1 PoE Time Range Setup

Use this screen to apply a schedule to the port(s) on the Switch. You must first configure a schedule in
the Advanced Application > Time Range screen.
Click the PoE Time Range Setup link in the Basic Setting > PoE Setup screen. The following screen opens.
Figure 66 Basic Setting > PoE Setup > PoE Time Range Setup
The following table describes the labels in this screen.
Table 32 Basic Setting > PoE Setup > PoE Time Range Setup
LABEL
Port Time Range Setup
Port
Chapter 8 Basic Setting
DESCRIPTION
This field displays the maximum amount of power the PD could use from the Switch on this port.
This field shows whether or not the port currently receives power from the Switch according to its
schedule.
• It shows "In" followed by the time range name if PoE is currently enabled on the port.
• It shows "Out" if PoE is currently disabled on the port.
• It shows "-" if no schedule is applied to the port. PoE is enabled by default.
DESCRIPTION
Enter the number of the port to which you want to apply a schedule.
XS1930 Series User's Guide
93