Connecting The Printer; Network Connection - Ricoh Aficio CL4000DN Setup Manual

Hide thumbs Also See for Aficio CL4000DN:

Table of Contents

4. Connecting the Printer

Follow the procedure below to connect the printer to the computer through the

network. Prepare the hub and other network devices before connecting the 10

BASE-T or 100 BASE-TX cable to the machine's Ethernet port.

Important

❒ Use shielded Ethernet cable. Unshielded cables create electromagnetic inter-

ference that could cause malfunctions.

❒ Ethernet cable is not supplied with this machine. Select your cable according

to the network environment.

Attach one ferrite core at the printer end of the Ethernet cable, and then at-

tach the other ferrite core about 10 cm (4 inches) ( ) from this core.

Connect the Ethernet cable to the Ethernet port.

Connect the other end of the cable to the printer's network, such as a hub.

Reference

For details about network environment settings, see Software Guide.

AET121S

AET122S

Table of Contents

Aficio cl4000hdn