Substitute Reception - Gestetner F540 Advanced Features

Substitute Reception

If any of the conditions listed below are met, the machine automatically switches
to Memory Reception mode and stores messages in memory instead of printing
them. This reception mode, in which a received fax message is stored in memory
and not printed, is called Substitute Reception. When Substitute Reception oc-
curs, the Receive File is lit. Messages received using Substitute Reception are au-
tomatically printed when the problem which caused the machine to use
Substitute Reception is rectified.
The table below lists some problems that could cause Substitute Reception to
take place and their solutions.
Problem
B is lit red.
D is lit red.
" Clear Misfed Paper
is displayed.
"
Close Front/Right
" or "
Cover Close Lower
" is dis-
Right Cover
played.
"Energy Saver Mode" indica-
tor and "Receive File" indica-
tor are lit.
Another function, such as the
optional printer function, is
currently printing.
Note
❒ You can switch this function on or off with the User Parameters. See p.138
"User Parameters" (switch 05, bit 0).
Causes
Paper has run out.
Toner has run out.
Paper is jammed.
"
Cover is open.
The machine is in Energy Sav-
er Mode.
Machine is busy printing with
another function.
Solutions
Add paper. See p.89 "Loading
Paper in the Main Paper
Tray", Basic Features.
Replace the toner cartridge.
See p.90 "Replacing the Toner
Cartridge", Basic Features.
Remove the jammed paper.
See p.96 "Clearing a Copy,
Fax, or Print Jam", Basic Fea-
tures.
Close the cover. See p.18
"Guide to Components", Ba-
sic Features.
Press the { { { { Energy Saver/Clear
Modes} } } } key.
The message will be printed
automatically after the current
job finishes.
General
4
69