Table of Contents
Advertisement
Other Transmission Features
Selecting the Line
This feature requires the optional extra G3 interface unit.
Installing this option expands the ma-
chine's line capacity to a maximum of
2 lines.
The optional extra G3 interface unit
connects to the PSTN.
3
Note
❒ Only one PSTN line is available
with the base machine when no
options are installed.
❒ Up to two lines can be used simul-
taneously.
❒ The optional extra G3 interface unit
can be connected to a PSTN line.
❒ The optional extra G3 interface
unit can be used for reception ex-
clusively. To change the setup,
please contact your service repre-
sentative.
❒ When sending a fax and choosing
the line, you can only specify desti-
nations with the number keys and
the Chain Dial feature.
❒ You can choose whether to use the
default G3 line and expanded G3
line as a PSTN line (outside line),
or as a PABX line (extension) with
the User Parameters. See p.138
"User Parameters" (switch 13; bit
1,0), (switch 13; bit 3, 2).
❒ The On Hook Dial function is not
available with the lines from the
optional unit. See p.48 "On Hook
Dial".
❒ The available combinations of con-
nected line type(s) and communi-
cation type(s) is as follows.
50
Optional
Connected
Compo-
Line
nent(s)
Type(s)
Base Machine PSTN
Base Machine
PSTN + PSTN
+ Optional
(Optional)
Extra G3 In-
terface Unit
❒ When the machine is performing
more than one communication at a
time, the information of the first
communication established is
shown on the display.
❒ Up to two communications can be
performed at one time.
❒ You can send one fax and receive
one simultaneously.
-
- How to Select the Line When
-
-
G3 Line(s) Are Connected
through a PABX
When one G 3 line is conn ected
through a PABX, change the G3 line
setting to a PABX line (extension)
with the User Parameters, and then
assign the Extension function to a
User Function key. You can choose
whether to use a PABX line or a PSTN
line by pressing the User Function
key in which the Extension function is
stored.
When both G3 lines are connected
through a PABX, you can select the
line by just performing the "How to
Select the Line" procedure.
Reference
p.51 "How to Select the Line"
p.138 "User Parameters"
Available
Communi-
cation
Type(s)
G3
G3 + G3
Advertisement
Table of Contents
