Table of Contents
Advertisement
Limitation
❒ This feature is only available with
Memory Transmission.
Note
❒ You cannot send duplex originals
using Parallel Memory Transmis-
sion.
A A A A
Make sure the Memory Transmis-
sion indicator is lit.
Note
❒ If it is not, press the { { { { Memory
Trans.} } } } key.
B B B B
Press the User Function key ( { { { { F1} } } }
to { { { { F10} } } } ) with the Duplex func-
tion programmed in.
C C C C
Place the two-sided original with
the front page face-up.
D D D D
Select any scan settings as neces-
sary.
E E E E
Dial the destination number.
F F F F
Press the { { { { Start} } } } key.
Scanning of the front page begins.
When scanning has finished, the
following display appears.
G G G G
Place the original with the back
page face-up.
Note
❒ Adjust the original so that the
back page is scanned in the
same direction as the front page
was scanned in.
❒ Set the document within 60 sec-
onds. If time runs out, an error
will occur and transmission will
not take place.
H H H H
Press the { { { { Start} } } } key.
Scanning of the back page begins.
When scanning is finished, trans-
mission starts.
If the number of back pages and front
pages are different
A A A A
When the number of back pages
and front pages are different, the
following display appears.
B B B B
Press the { { { { OK} } } } key.
When transmitting the stored
pages
A Press 0 0 0 0 or 1 1 1 1 to select "Trans-
mit", and then press the { { { { OK} } } }
key.
Note
❒ Successfully scanned pages
are sent. Check the number
of transmitted pages on the
Communication Result Re-
port.
When deleting the stored pages
A Press 0 0 0 0 or 1 1 1 1 to select "De-
lete", and then press the { { { { OK} } } }
key.
Transmission Features
53
3
Advertisement
Table of Contents
