Table of Contents
Advertisement
Deleting a specified sender
A Press 0 0 0 0 or 1 1 1 1 until "3. Delete
Sender" is displayed.
B Press the { { { { OK} } } } key.
C Press 0 0 0 0 or 1 1 1 1 to display the
specified sender you want to
delete.
D Press the { { { { OK} } } } key.
Printing a list of specified senders
A Press 0 0 0 0 or 1 1 1 1 to display "4.
Print Sender List".
B Press the { { { { OK} } } } key.
C Press the { { { { Start} } } } key.
The list is printed out.
K K K K
Press the { { { { User Tools} } } } key.
The standby display reappears.
Using Key Operator Settings
Multi-copy Reception
Use this feature to have the machine
print multiple copies of messages
from specified senders. If no specified
senders are registered, the machine
prints multiple copies of all messages,
regardless of sender.
Note
❒ It is recommended that you print
the Specified Sender List and keep
it after registering or editing set-
tings for this function. See p.123
"Printing a list of specified send-
ers".
❒ Multiple copies cannot be made of
messages received using Polling
Reception and Free Polling Recep-
tion, as well as Confidential Mes-
s a g e s a n d M e m o r y - l o c k e d
Messages.
❒ You can specify the number of cop-
ies from 2 to 9.
❒ You can choose to print a specified
number of copies of messages
from specified senders, or to print
specified number of copies of mes-
sages from senders other than
specified senders with the User Pa-
rameters. See p.138 "User Parame-
ters" (switch 08; bit 1,0).
❒ You can program specified send-
ers for the following six functions:
Authorized Reception, Memory
Lock, Multi-copy Reception, Speci-
fied Tray, Two-sided Reception,
and Forwarding. The maximum
number of specified senders is 50.
❒ You can use up to 24 characters
when registering a specified send-
er for G3 communication. You can
also specify wildcards. See p.85
"Entering Characters", Basic Fea-
tures.
7
121
Advertisement
Table of Contents
