Gestetner F530 Install Manual

Gestetner f530: install guide

Advertisement

Before You
Use This
Machine
Before you can send or receive fax messages,
please take about 30 minutes to set up your machine.
Set up your machine using the following procedures.
Keep going...

Advertisement

Table of Contents
loading

Summary of Contents for Gestetner F530

  • Page 1 Before You Use This Machine Before you can send or receive fax messages, please take about 30 minutes to set up your machine. Set up your machine using the following procedures. Keep going...
  • Page 2: Toner Cassette

    R WARNING: • Disconnect the power plug (by pulling the plug, not the cable) if the power cable or plug becomes frayed or otherwise damaged. • To avoid hazardous electric shock or laser radiation exposure, do not remove any covers or screws other than those specified in this manual.
  • Page 3 Remove the fixing material from the axis. Close the Document Feeder (ADF) and make sure it locks securely into place. Open the front cover. Remove the fixing material. Push the lever ( ) and pull out the toner cassette holding Hold the cassette horizontally and shake it gently from side to side a few times.
  • Page 4 Return the toner cassette. Push the toner cassette in until it locks securely into place. Remove the fixing material. Pull the two red tags to remove the plastic strips. Close the front cover. Keep going...
  • Page 5 Preparing the Main Paper Tray Pull the paper tray out of the main unit. If necessary, adjust the paper size. As a default, the paper size in the tray is set as 8 " 11". Reference T To change the paper size in the paper tray, see “Changing the Paper Size in the Main paper tray”...
  • Page 6: Paper Tray Unit

    Installing the Optional Paper Tray Unit If you install the Optional Paper Tray Unit later, read the following WARNING, CA UTION and Impor tant, and then perform R WARNING: • Connect the power cord directly into a wall outlet and never use an extension cord.
  • Page 7: Installing The Optional Memory Card

    There are two pins on the top of the Paper Tray Unit that point straight up. On the bottom of the machine there are two holes. Align the holes over the pins and lower the machine gently onto the Paper Tray Unit. Note •...
  • Page 8: Connecting The Power And Switching On

    Insert the memory card carefully into the slot on the left side of the machine. Note • Insert the Memory Card firmly or the machine may not work properly. Attach the memory card cover. Insert the tab of the cover in the slot ( ), and fix the cover with the screw ( ).
  • Page 9: Connecting The Telephone Line

    Connecting the Telephone Line There are similar sockets located at the left side of the machine: TEL: For the optional handset or the external telephone LINE: Telephone line connection Insert the line cable into the socket labeled “Line”. Connect the other end to your telephone line. Installing the Optional Handset...
  • Page 10: Initial Settings

    Insert the handset jack into the “TEL” socket. Initial Settings & Adjustments The following display appears after the power is turned on for the first time. Do not turn off the power until you have completed the following procedure. Year: Press OK [2002] Before using the machine, please adjust the fol-...
  • Page 11 Enter the date with the number keys. Day: Press OK [ 1] Press the OK key. Press the key to select AM or PM. WV /OK AM/PM: [AM] Press the OK key. Enter the current hour setting (1 to 12) with the number keys.
  • Page 12 That’s it! Printed in China EN USA H555-8580...

Table of Contents