Table of Contents
Advertisement
Key Operator Settings
K K K K
Press the { { { { User Tools} } } } key.
The standby display reappears.
Remarks on Two-sided Reception
Limitation
❒ To use this function, all pages of
the received document must be of
the same size. Inform the sending
party of this beforehand if neces-
sary. You must also have paper set
in your machine of the same size as
that sent by the sending party. This
machine will correctly scan land-
s c a p e 8
1
8
/
"x13", 8
2
A4. The following table shows the
results that can be achieved when
sending and receiving using this
machine.
7
❒ This feature works only when mes-
sages are received with Memory
Reception.
❒ If there is no paper in your ma-
chine that matches the size of a re-
c eived me ssage, the mac hine
chooses a paper size based upon
the paper you have available (see
p.79 "When There Is No Paper of
the Correct Size"). Two-sided Re-
ception works only when the ma-
chine chooses the tray for which
the Two-sided Printing function is
turned on.
❒ Printouts may vary depending on
how the sender set them.
128
1
1
/
" x 1 4 " , 8
/
" x 1 1 " ,
2
2
1
1
/
"x13", 8
/
"x14", and
4
4
ZHMX010E
❒ If another party sends you a fax
and their machine is not able to de-
tect the size of the original correct-
ly, the message may come out
truncated, separated or containing
excess white space when printed at
your end. For example, if the send-
ing machine thinks a 8
1
original is a 8
/
2
will be printed at your end on
1
8
/
"x14" size paper even if you
2
1
have 8
/
"x11" paper available in
2
your machine.
Note
❒ It is recommended that you print
the specified sender List and keep
it after registering or editing set-
tings for this function. See p.127
"Printing a list of specified send-
ers".
❒ You can choose to print messages
from specified senders, or messag-
es from senders you specify on
both sides of paper with the User
Parameters. See p.138 "User Pa-
rameters" (switch 35; bit 1,0).
❒ You can program specified send-
ers for the following six functions:
Authorized Reception, Memory
Lock, Multi-copy Reception, Speci-
fied Tray, Two-sided Reception,
and Forwarding. The maximum
number of specified senders is 50.
❒ You can use up to 24 characters
when registering a specified send-
er for G3 communication. You can
also specify wildcards. See p.85
"Entering Characters", Basic Fea-
tures.
❒ If the specified sender's fax ma-
chine is of the same make as your
machine, register the sender name
registered to their machine. If the
specified sender's fax machine is of
a different make, register the fax
number.
1
/
"x11"
2
"x14" original, it
Advertisement
Table of Contents
