Table of Contents
Advertisement
Operation
Edge Erase
When printing from thick books, or
similar originals, a shadow caused by
1
the binding may show up on the
prints. If you print using the Edge
Erase mode, such shadows will be
erased automatically.
❖ ❖ ❖ ❖ With Edge Erase mode
A
❖ ❖ ❖ ❖ Without Edge Erase mode
A
Note
❒ You can specify within a range of 0
to 20mm, 0" to 0.8", the width of
the margin to be erased. See "5
Margin Eras.Area" on p.74 "3 Ini-
tial Setting".
❒ The default is 5mm, 0.2".
A A A A
Press the { { { { Edge Erase} } } } key.
30
B
A
B
B
B B B B
Use the { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } } keys to select the
original size and orientation, and
then press the { { { { OK} } } } key.
C C C C
Set your original.
D D D D
Enter the number of prints with
the number keys.
GRERAS0E
GRERAS1E
E E E E
Press the { { { { Start} } } } key.
Printing starts automatically after
the trial print.
Note
❒ If you wish to check the image
before printing, press the { { { { Auto
Cycle} } } } key before pressing the
ZLKS082N
{ { { { Start} } } } key, in order to disable
Auto Cycle mode. See p.17
"When Auto Cycle mode is off".
ZLKS032N
ZLKS030N
Advertisement
Table of Contents
