Video Dynasync - ATEN CM1284 User Manual

TM
Multi-View KVMP

Video DynaSync

The Video DynaSync command allows you to set the EDID settings. Type your
command in the following format:
Command + Control + [Enter]
Command
vds
Control
default
port 1
port 2
remix
For example, to set the default EDID setting, type the following:
vds default [Enter]
For example, to enable EDID detection, type the following:
vds on [Enter]
Note: Each command string can be separated with a space.
86
Switch User Manual
Video DynaSync Command
Set the EDID to ATEN default settings:

For CM1164A, the resolution is 1920 x 1080 @60Hz

For CM1284, the resolution is 4096 x 2160 @30Hz
Set the EDID to the EDID of the monitor connected to port 1 of
the Multi-View KVMP
Set the EDID to the EDID of the monitor connected to port 2 of
the CM1284.
Set the EDID to an optimum among all the connected
displays.
Description
Description
TM
Switch.