Table of Contents
Advertisement
TM
Multi-View KVMP
To switch stereo audio access to a computer, press Mode 3 times, and then
press the KVM Port Selection pushbutton that corresponds to the
computer.
To switch USB access to a computer, press Mode 4 times, and then press
the KVM Port Selection pushbutton that corresponds to the computer.
Press KVM Port Selection pushbuttons 1 and 2 for 2 seconds to start
Auto Scan Mode. To stop auto scan, press and release either port selection
pushbutton.
LED Display
The front panel has three LEDs that represent the KVM, Audio and USB
source. The LEDs light green or orange depending on which source is being
accessed on what computer, as explained in the table.
LED
Icon
KVM
Audio
USB Link
30
Switch User Manual
Lights BRIGHT ORANGE to indicate KVM is selected.
Flashes ORANGE to indicate that the computer is being
accessed in Auto Scan Mode.
All flash ORANGE to indicate a firmware upgrade has
been invoked.
The corresponding port LED of the USB keyboard/
mouse flashes when Keyboard Bypass is enabled.
Lights a faint ORANGE to indicate that a computer is
powered on.
Lights BRIGHT GREEN to indicate Audio is selected.
Flashes GREEN to indicate that Audio is selected on a
computer in a Daisy Chain setup.
Lights BRIGHT GREEN to indicate USB is selected.
Flashes GREEN to indicate that USB Link is selected on
a computer in a Daisy Chain setup.
Indication
Advertisement
Table of Contents
