Table of Contents
Advertisement
Switch Port
The switch port command allows you to switch between computers connected
to the Multi-View KVMP
following format:
Command + Input Command + [Enter]
Command
sw
Input Command
px
Input port number,
x= 1~4 (Default: 1)
Example: p2
For example, to switch to port 2, type the following:
sw p2 [Enter]
Note: 1. Each command string can be separated with a space.
2. The Port Number command string can be skipped, and the default
value will be used.
Switch's ports. Type your command in the
TM
Switch Port Command
Chapter 6. RS-232 Operation
Description
Description
71
Advertisement
Table of Contents
