Change Display Mode - ATEN CM1284 User Manual

TM
Multi-View KVMP

Change Display Mode

The Change Display Mode command allows you to change the Display mode
being used. Type your command in the following format:
Command + Control + [Enter]
Command
display
Control
full
quad
pip2
pip3
pip4
pop
pbp1
pbp2
pbp3
For example, to set the Quad display mode, type the following:
display quad [Enter]
Note: Each command string can be separated with a space.
74
Switch User Manual
Change Display Mode Command
Enable console port to full screen display
Enable Quad display mode, console port focus remains the
same
Enable PiP Dual display, console port focus remains the
same on channel 1, and channel 2 displays the video of the
port next to the console port being displayed
Enable PiP Triple display, console port focus remains the
same on channel 1, with channel 2 and channel 3 displaying
the video of the ports next to the console port being displayed
Enable PiP Quad display, console port focus remains the
same on channel 1, with channel 2, channel 3, and channel 4
displaying the video of the ports next to the console port
being displayed
Enable PoP display, console port focus remains the same.
Enable the dual picture-by-picture display, console port focus
remains the same.
Enable the triple picture-by-picture display, console port
focus remains the same.
Enable the quad picture-by-picture display, console port
focus remains the same.
Description
Description