ATEN CM1284 User Manual page 71

Setting
Port 1 OS
Port 2 OS
Port 3 OS
Port 4 OS
Advanced
Expansion
Control Station
Auto Scan
Auto Scan Duration
Auto Scan Mode
Options
Win / Mac / SUN / SPC
Win / Mac / SUN / SPC
Win / Mac / SUN / SPC
Win / Mac / SUN / SPC
Daisy Chain / Cascade Sets the Multi-View KVMP
Station 1 / Station 2 /
Station 3 / Station 4
Enable / Disable
5s / 10s / 15s / 30s /
60s / 90s
Cycle / Powered-on
PC
Chapter 5. OSD Operation
Description
Defines the operating system for each
of the connected computers.
deployment type.
This setting is only available when
Expansion is set to Daisy Chain.
Select a daisy-chained secondary
station for keyboard and mouse
control.
Enable this function to have the Multi-
TM
View KVMP Switch cycle from port to
port at the defined Auto Scan Duration.
This gives users an automated way of
viewing all the computers connected to
the ports.c
Double-click the mouse wheel to switch
to the next port.
This setting is only available when Auto
Scan is enabled. Sets the duration that
a port has KVM focus before the focus
switches to the next port.
This setting is only available when Auto
Scan is enabled.

Cycle: Sets the Auto Scan to cycle
through all computers.

Powered on: Sets the Auto Scan to
only scan powered on computers.
TM
Switch's
61