Backup / Restore
To backup or restore the Multi-View KVMP
the following:
1. Connect a PC's USB port to the Multi-View KVMP
KVM Port 1 using the supplied KVM cable.
2. Download the firmware upgrade package.
a) From the computer you just connected to the Multi-View KVMP
Switch, go to the product web page.
b) Click Support and Downloads and download the firmware upgrade
package of your choice.
3. Use one of the following methods to enable the Firmware Upgrade mode.
From the OSD Menu, set the Firmware Upgrade mode to Yes.
Use the hotkeys: invoke the HSM, press [u][p][g][r][a][d][e], and then
press [Enter].
All the LEDs flash orange to indicate that the Firmware Upgrade Mode is
in effect.
Note: The console mouse and hotkey functionality are suspended while
the upgrade is in progress.
4. Double-click the executable in the downloaded package. This screen
appears.
Chapter 7. System Maintenance
Switch's OSD configuration, do
TM
Switch's USB
TM
TM
103