Hotkey Setting
The Hotkey Setting command allows you to enable/disable and change the
hotkey used to invoke the HSM (Hotkey Setting Mode). Type your command
in the following format:
Command + Control + [Enter]
Command
hotkey
Control
num
f12
off
on
For example, to enable the hotkey function, type the following:
hotkey on [Enter]
For example, to change the HSM invoke key to [Ctrl] + [F12], type the
following:
hotkey f12 [Enter]
Note: Each command string can be separated with a space.
Hotkey Setting Command
Change the HSM invoke key to:
[Num Lock] + [-]
Change the HSM invoke key to:
[Ctrl] + [F12]
Disable hotkey function
Enable hotkey function
Chapter 6. RS-232 Operation
Description
Description
89