Chapter 3. Basic Operation
Hotkey Switching
You can switch to a computer using hotkeys from the keyboard.
To switch to computer 1, do the following:
1. Press and hold down [Num Lock].
2. Press and release [-].
3. Release [Num Lock].
4. Press [1].
5. Press [Enter].
Repeat the steps using Port ID (1, 2, 3, 4) in step 4 to switch to the computer
connected to that port. For more hotkeys, see Hotkey Operation, page 47.
IR Remote Switching
You can switch to a computer with the IR remote control. Point the remote at
the Multi-View KVMP
Switch and press the Port Selection button of the
TM
computer you want to access.
31