Dcc Control - ATEN CM1284 User Manual

DCC Control

The DCC Control command allows you to set the deployment type (daisy chain
or cascade) of your Multi-View KVMP
applied to all cascaded secondary Multi-View KVMP
command in the following format:
Command + Control + [Enter]
Command + Control
clone on
clone off
dcc on
dcc off
For example, to enable DCC control, type the following:
dcc on [Enter]
Note: Each command string can be separated with a space.
TM
Enable the clone mode with which commands are
automatically applied to all daisy-chained secondary Multi-
TM
View KVMP Switches. For example, the command swp1
will switch the KVM focus of each daisy-chained, secondary
TM
Multi-View KVMP
1.
Disable the clone mode.
Sets the Multi-View KVMP
Sets the Multi-View KVMP
Chapter 6. RS-232 Operation
Switch system and if commands are
Switches. Type your
TM
Description
Switch to its computer connected to port
TM
Switch to the daisy chain mode.
TM
Switch to the cascade mode.
83