Pip Mode - ATEN CM1284 User Manual

TM
Multi-View KVMP

PiP Mode

The PiP Mode command allows you to change the Picture in Picture display
mode settings. Type your command in the following format:
PiP Configuration Setting:
Command + Config1 + Config2 + Config3 + Config4 + Config5 + [Enter]
PiP Setting Execute:
Command + Execute + [Enter]
PiP Advance Setting:
Command + Control1 + Control2 + Config1 + Config2 + Execute + [Enter]
Command
pip2
pip3
pip4
Control
cxpy
For example, to Enable Channel Scan for Picture in Picture Triple Mode, type
the following:
pip3 c2scanon [Enter]
Note:
 Each command string can be separated with a space.
 The Port Number command string can be skipped, and the default value
will be used.
72
Switch User Manual
Picture in Picture Dual Mode
Picture in Picture Triple Mode
Picture in Picture Quad Mode
c: Output channel, x= 1~4
p: Input port, y= 1~4
Example: c2p4
Description
Description