ATEN CM1284 User Manual page 61

Hotkey
General [F1
Settings
[F2]
[F3]
[F4]
[F5]
[F6] [n]
[B]
[E]
[F] [n]
[H]
[L]
[M] / [m]
[N] / [n]
[u][p][g][r][a][d][e]
[W] / [w]
Set the operating system to SPC.
Enable or disable Mac keyboard emulation.
Enable or disable Sun keyboard emulation.
List the current settings of the Multi-View KVMP
Switch. To use this function, open a text editor or word
processor, and place the cursor in the page window
before invoking the HSM and enter the hotkey.
Reset USB devices. If any USB devices lose focus or
connectivity, a USB reset may solve the issue.
[n] sets the keyboard language:

n = 08 (French)

n = 09 (German)

n = 15 (Japanese)

n = 33 (English)
Enable or disable the beeper.
Enable or disable Power On Detection with which the
TM
Multi-View KVMP
powered-on computer when a computer that has KVM
focus is powered off.
Apply the specified Fn preset configurations (n = 1, 2,
3, or 4). For more information on Fn preset
configurations, see Preset Configuration, page 44.
Enable or disable the Hardware Cursor Mode.
Lock or unlock the front-panel pushbuttons.
Enable or disable mouse emulation.
Enable or disable keyboard emulation.
Initiate a firmware upgrade.
Enable or disable port switching using the console
mouse.
Chapter 4. Hotkey Operation
Action
Switch switches to the next
TM
51