ATEN CM1284 User Manual page 38

TM
Multi-View KVMP
 Port ID number: This number is assigned according to the port that the
computer is connected to on the rear of the KVM Switch. For example, a
computer connected to port 1 is assigned port ID 1.
Note: In a cascade setup, a port ID number of "1-3" indicates that the video
source comes from the third port of the secondary Multi-View
KVMP
KVMP
 Device name: By default, the computer connected to port 1 is named PC 1,
the computer connected to port 2 is named PC 2, and so forth. To change
the device name, go to System Settings > Port Configuration.
28
Switch User Manual
Switch connected to port 1 of the primary Multi-View
TM
Switch.
TM