Table of Contents
Advertisement
TM
Multi-View KVMP
Setting
HSM
Menu Hotkey
Display
Channel Info
Multiview Mode
Channel 1
Channel 2
Channel 3
Channel 4
Save to Fn
Toolbar Position
Transparency
Port Configuration
Port 1 Name
Port 2 Name
Port 3 Name
Port 4 Name
60
Switch User Manual
Options
[Num][-] / [Ctrl][F12]
Scroll*2 / Ctrl*2
Enable / Disable
Single / Quad / PiP2 /
PiP3 / PiP4 / PoP /
PbP1 / PbP2 / PbP3 /
Fn1 / Fn2 / Fn3 / Fn4
Port 1 / Port 2 / Port 3 /
Port 4
Port 1 / Port 2 / Port 3 /
Port 4
Port 1 / Port 2 / Port 3 /
Port 4
Port 1 / Port 2 / Port 3 /
Port 4
Fn1 / Fn2 / Fn3 / Fn4
Top / Bottom
Enable / Disable
PC1
PC2
PC3
PC4
Description
Defines the hotkey combination for
enabling the Hotkey Setting Mode
(HSM).
Sets the hotkey combination for
opening the menu.
Enable this setting to display port ID
numbers and device names.
Sets or changes the display mode for
the Multi-View KVMP
details about each display mode, see
Display Modes, page 34.
Sets the source assignment for each
channel. For example, if you select
Port 2 for Channel 1, port 2 source will
be displayed on Channel 1, and port 1
source will be displayed at Channel 2.
Saves the view mode settings to the
selected Function mode.
Sets the position of the Quick Access
Toolbar.
Enable this setting to make the inset
window(s) of a PiP display semi-
transparent.
Note: This setting only applies to the
built-in PiP2, PiP3, and PiP4 modes.
Type to name the computers
connected to port 1 / port 2 / port 3 /
port 4 on the Multi-View KVMP
Switch. The Multi-View KVMP
only supports English characters of
upper and lower cases, numbers,
hyphens, and underscores.
TM
Switch. For
TM
TM
Switch
Advertisement
Table of Contents
