Table of Contents
Advertisement
Split Page / Layer Page
Program
The default Split or Layer Program will appear in the lowest numbered inactive Zone. Use
the ALPHA WHEEL or CATEGORY buttons to select a different Program for the selected
Zone.
Split Mixer Page / Layer Mixer Page
Volume
The Volume parameter sets the volume of each Zone. To change the volume of a Zone:
1. Select a Volume parameter for the desired Zone by using the PREVIOUS and NEXT
buttons.
2. Change the volume by using the ALPHA WHEEL, or use the keypad function of the
CATEGORY buttons to type a volume value (0-127) followed by pressing the ENTER
button.
A value of "None" can also be selected, which will use the last volume value used by the
Zone's MIDI channel. (This volume values is often set by the expression pedal.) A value of
"None" can be entered by using the ALPHA WHEEL to scroll below 0.
Pan
The Pan parameter sets the panning (left/right stereo placement) of each Zone. To change the
panning of a Zone:
1. Select a Pan parameter for the desired Zone by using the PREVIOUS and NEXT
buttons.
Multi Mode
SPLIT/LAYER
4-9
Advertisement
Table of Contents
