Program Mode; Selecting Programs - Kurzweil SP6-7 Musician's Manual

Chapter 2

Program Mode

Use Program Mode to play a Program directly from the keyboard, or to play up to 16
Programs multitimbrally via MIDI. Programs typically contain a single instrument sound,
although some Programs may contain multiple instrument sounds.
The SP6 always powers on with Program Mode selected. To enter Program Mode from
another Mode, press and turn on the PROGRAM Mode button, or press the EXIT button
repeatedly until you reach Program Mode.
The SP6 powers on with Program 1 selected, or the Program that was selected the last time
Global Mode was exited.

Selecting Programs

In Program Mode, use any of the methods below to select a Program.
Browse All Programs
Make sure the USER button is off, then use the ALPHA WHEEL or PREVIOUS and
NEXT buttons to select a Program from all of the available Programs.
Select a Program by Category
Make sure the KEYPAD button is off, then press one of the CATEGORY buttons to select
the first Program of a category (or the current Category Default Program). The selected
CATEGORY button will turn on. Use the ALPHA WHEEL or PREVIOUS and NEXT
buttons to select Programs from the selected category.
Select a Previously Saved User Program
Press and turn on the USER button, then use the ALPHA WHEEL or PREVIOUS and
NEXT buttons to browse only User Programs. To return to browsing Factory and User
Programs, press and turn off the USER button.
Program Mode
Selecting Programs
2-1